Showing posts with label holster. Show all posts
Showing posts with label holster. Show all posts

Tuesday, October 11, 2016

Review: BladeTech TEK-LOK Belt Clamping Unit

When it comes to keeping extra gear on my person, and I am not wearing one of my PALS equipped belts, like the subtle SICC belt or the more hooah Condor GEN1 battle belt there are times when you still want to have a well mounted piece of gear, with a more regular belt, even if its the dual-purpose PM Leather hobble Belt ...

When you want to mount carry something with any really weight on a belt, there are really two things that you need to take into account, the strength and stiffness of the belt, and the weight, and method of use  of the item to be carried.

A stable platform, such as that produced by Bladetech in the TEK-LOK belt clamping unit. This is a high density polymer belt clip that allows the user to fasten virtually any kind of load to a regular belt.

The principle is simple. A clam shell hinged design allows the user to quickly and easily slip the mounting over a belt in place, and closes at the bottom, with first a pair of pinch-to-open horns and then a latch that folds up and around, locking the horns from pinching open, both of which are held against the body when worn, keeping them protected from any conceivable accidental release. Inside the clip there are a run of holes cut into the back face, into which two rubberised spacers which can be placed at a variety of spots in order to give the best hold on the belt, as well as eliminating slippage or wobble.

The business side of the clip however is the the flat faced plate which is dotted with a 3 x 3 grid of holes, through which rivets, screws and bolts can be threaded and fitted to the eyelets fitted to many of the  holsters, magazine carriers, phone holsters, knife sheaths and many other types of accessories that you will want to fit to belts and carry around with you. The inside face is recessed so your boltheads don't interfere with the belt, and ensure a safe and secure connection.

With bolts, and rubber spacers you can affix in many different combinations to allow you to set up whatever you are carrying to suit your needs, space and usage you had in mind.

The inner face of the TEK-LOK is slightly curved to marry with the body contours, the width of the top edge of the clip means it offers a stable platform, which as the load increases, becomes more and more important. I set mine up with my HHA ASOT-01 knife as an example and it ran really nicely.

One thing you'll find though is that you are at the mercy of the holster, sheath and carrier manufacturers, as the holes in the item to be mounted will determine how and where you can use the TEK-LOK, so bear that in mind, and if possible, try before you buy to ensure you get a good fit!

Monday, March 31, 2014

Review: First Spear - Walt holster

I had a flash of madness a while back, and bought myself something fairly silly, for me. A very specific purpose piece with very little chance of cross-purposing. But so damn cool looking.

This is the Walt torso holster from First Spear. I've been extremely happy with my First Spear OAGRE vest, which I've taken with me on my adventure and obstacle runs. These folks make some good gear, well thought out and put together.

The Walt will apparently fit the 1911, M9, 226, Glock, M&P, XD and other similarly sized pistols, none of which do I own, or have any reasonable expectation to do so any time soon (awww).
That said, its a really nice piece, and I wanted to have it to have an alternative to my Hazard4 RG Harness or the venerable EDC harness before that.

The holster is skinned in a grippy hypalon, which keeps it snug and slip free in position, and is lined with a micro-suede finish. Sewn to accommodate the trigger-guard, but reported not to take any optics or lights, a shock-cord and hypalon tab is set up for weapon retention. I found that the holster took my Strike Industries iPhone 5 SHOX case nicely.

Loops on the top and side of the holster are to affix the ITW G-hooks which give a quick but secure attachment for the baldric which as it happens, is set up with a single row of PALS/MOLLE loops along its length, until the webbing finishes of in an adjustable loop, for fitting. I mounted my awesome little ODDJob knife by SAR GlobalTool to mine, because it was a perfect addition to the rig, for the uses I have been putting it through.

The holster is designed to be worn under the right armpit, giving a left-hand pistol draw, which I thought was a little odd, but that's where I put my phone, anyway, so it worked out nicely for me.
I'd have to put the question out to the serious pistol carriers out there, as to your thoughts on this kind of set-up.

The bottom of the holster was open, to allow for longer barrels, and options for those of you who don't want to disturb your neighbors when shooting geckos and the lowest edge is set up for belt connection with the same kind of Quick Release buckle as seen on the OAGRE chest rig, being a looping hook-and-loop with press-stud to ensure a very secure connection, especially of the belt you are wearing features loop-fields to do just that.

Between the materials, the construction and the form, this is a pretty cool holster, with the gnarly First-Spear logo on the side, and its wrap-around PALS/MOLLE loops makes this a sadly under-utilised addition to my collection, but I like to pull it out from time to time when I can get away with a bandoleer ...





Wednesday, October 2, 2013

Review: Platatac - Leg Rig

I was looking over my collection of gear and realised there were a couple of items that have quietly gone un-reported, little pieces that seemed to take a back seat over their flashier cousins, and I wanted to give them some web-space too


I've shown this piece, in use, a couple of times, in my "No, Really" post, and coupled with its usual attachment, the Young Guns belt. However, it deserves it's own review. This is the 3/4 Leg Rig by Platatac.


I've covered a drop-leg holster in the past, and I have to be honest, they bring out the Han Solo in me ...

This was an early model of their now more mature Leg Rig but it serves me just fine. The three main features of the rig are: a  3 channel by 3 row PALS/MOLLE field, which is built on top of a 1000d Cordura with a stiff plastic reinforced backing platform.

Twin straps wrap around the thigh, and are half elasticized and half webbing backed with hook and loop. This gives you two different ways that you can adjust the fit, as well as it having sufficient flex to accommodate the changing dimensions of the thigh whilst running, climbing or scrambling. Anyone who has worn a non-elastic cuff whilst doing any of that kind of thing will tell you, its no fun. Two bands divides the load, and gives you a better fit to the shape of the thigh.



The "inside" of the rig shows us the way the mounting strap attaches, with a hook backed strap and a loop-faced side on the inside, to avoid abrasion. This gives you a really wide latitude for adjustment up and down, to ensure the best fit for your rig.

This was really good for me, as I have really long skinny legs, getting a thigh rig to sit right can be a real pain for me.  The thigh straps are free-sliding, and run through the middle of the rig, meaning you can customize the buckles and which thigh you wear it on to suit your need.

On top of the mounting strap, connected to a slider ring, is the belt clip. With both a hook and look backing, and two press studs, the belt clip not only bites down hard, and is adjustable for different bet sizes, it can also be woven into the middle of a riggers belt such as the 215Gear Ultimate for an extra secure and non-slip fit.

You can add any PALS/MOLLE capable item to the rig, I usually wear mine with my Drop Gas Mask bag as a dump-pouch, but could just as easily fit it with any 1, 2 or 3 channel PALS/MOLLE kit I wanted. The newer Platatac leg rigs are 4x4, giving the wearer a little more real-estate to mount on, but i have skinny thighs, and plenty of pockets already. I've been considering getting another, in the "more subdued" black to wear out and about, I've had similar rigs in past, but my colour pallet has lightened over the years...

Wednesday, May 15, 2013

Review: Platatac - FFE holster


I've mentioned before how good it is to be able to go to a supplier with a problem, and ask for solutions, without getting a hard sell. It's one of the reasons I am so fond of the Platatac guys, and why I point people in their direction when I get asked for equipping questions.

Here's a case in point.

When at Confest I did a bunch of wood chopping with my trusty Fiskars logsplitter and needing some way to carry it about, I slung it behind my Bravo hydration pack. Not very comfortable, but it worked. I wanted a better solution, and posed it to the guys at Platatac.

This is the Fix Freaking* Everything FFE holster. The idea was that the head of the Fiskars axe could sit in the throat of the holster, buckled down and snug under the dual press-stud and hook-and-loop safety of the fully adjustable retention straps. Alas, it was not to be, the geometry of the axe and holster just didn't match up.

However, I did get to play with a very cool holster, which they kindly loaned me to test out the theory.

Here's what I can tell you about it.
Constructed from the same 100d Cordura that almost all the Platatac range is built from, this multi-layered holster is stiffened throughout with extra stitching and layering. This gives it a very sturdy and form fitting shape, perfect for weapon retention.

The back side features two channels of 4 row PALS/MOLLE strapping, which gives a very solid attachment to a chest-piece, thigh rig or belt.



Opening up the outer layers, you observe the multiple sandwiching sides of hook-and-loop, giving you a wide range of customisation, both in models of handgun (like, in the extreme, my Plastation lightgun used here) and also accessories (lights, sights).

This is accomplished by having those overlapping layers of double sided hook-and-loop panels, allowing the fit to contour to the system carried. You can see here that the retention strap itself can also be adjusted, to conform to the  back geometry of the pistol retained.
Unfolding further, you can see that the inside of the holster also features a webbing loop, to form a pocket to contain the muzzle end.

From this angle you can also see the snap end of the press-stud retainer. This is also adjustable, but is very tightly fitted between two very closely sewn layers of hook-and-loop, making it a tricky operation, but a very ridged hold when in place. This retainer is further stiffened with a rigid plastic core, for added security.


 Opening the holster up flat exposes more clearly the single channel of three PALS/MOLLE loops, allowing the addition of a single pistol magazine or accessory pouch, to the leading edge of the holster.

Comparing this to the drop-leg holster I reviewed a while back seems unfair, because this is obviously the real deal.

So, an experiment that didn't work out, but a very useful one, and in the end, I -DID- come up with a solution to the "carry the axe about" problem, with the help of the guys.... to follow soon ....



* Actual wording my vary, but I adjusted for delicate USAnian readers.


Wednesday, March 20, 2013

Review: Tactical Tailor - Concealed Carry Sling Bag

This is the second item in my series for David Reeder of KitUp! and Casey Ingels of Tactical Tailor, and I am thrilled to be getting my hands on another pre-release item, which made it's way over the Pacific to me here in Australia. Due to be released later in March, hopefully this review will stir your interests and imaginations.

I'm always keen to include inconspicuous items to my repertoire, both in my EDC, and how I go about lugging it. Recent air flight trips reminded me that having a high density and easy to store carry-on bag is very desirable. My trial of the Zombie Outbreak Hydro Pack was a good experiment, but when it comes down to it, I want something rock solid. I am happy to say that the Concealed Carry Sling Bag by TacticalTailor is that. Made predominantly from a 500d Cordura, in blue-grey and black, this is a sporty looking pack that has a sting in its tail.



This is an ambidextrous pack, with a single central main padding shoulder strap, with twin detachable straps, with an interesting styled clip at the end of each, anchoring to a ring at the end of the shoulder strap. Each of the detachable straps features a long webbing, sufficient to create a "third leg" style wrap around connection, to keep the pack stable on your back when running, climbing and generally adventuring.

The shoulder strap is heavily padded with a breathable mesh covering, giving both really solid padding, broad coverage over the shoulder and a wide attachment to the body of the pack, giving a very stable connection. The top of the strap to pack connection also features a very sturdy carry handle. It appears to have a Helium-Whisper compatible loops down towards the strapping end, but I don't have anything compatible to test that out on.

Another nice feature is that both detachable straps have a padded "wing" for where the webbing would otherwise dig into your kidney, both of which have webbing stitched in, not quite PALS/MOLLE proportioned, but certainly compatible, if you wanted to affix an accessory. Topping it off, there is a pocket behind the wings on both sides to stow the detached strap, if not being used as a "third leg" to get rid of dangling cords for a more streamlined fit.

Inside the main compartment, which has double zipper pulls, each with a hefty cord pull-assist, which works to give out a full opening compartment, which as you can see can fit a variety of goods. When filled, this compartment nicely fits the depth of my Zombie Squad Nalgene, so that makes a good guide for how much stuff you can lug in this section.

Inside the front compartment, which is fitted with a long daisy-chain of webbing loops running vertically over it's surface, and sporting another two cord-fobbed zippers for closure, you'll find the first of two hidden surprises is pack had to offer. Fitted to the loop field that makes up the entire of the back surface, is an adjustable pistol holster. This hook-backed panel loops around on itself to give an adjustable width, and has an accessory strap to accommodate the length of your pistol. Off to the side of the panel is an elastic loop to hold a spare magazine. I've not decided what I will use this holster for, not having a pistol to carry, myself, but I'll be sure to find something to use it for. This compartment easily holds a Nalgene bottle, with some spare room at the sides.

At the very back of the pack is where the real secret lies. Behind a very inconspicuous zipper, blended right in with the seam of the grey Cordura and the meshed-foam backing is another cord-fobbed zipper, (one for each side of the bag for true ambi action) is the final compartment, held snug against your body, for the concealed carry win.

Again as with the front compartment, this has a broad loop-field panel, encompassing the entire back, and comes with a very thorough admin panel, but this can be fitted to the front compartments panel, swapping out to suit your needs. Currently I am keeping my iPad in is compartment, until I can think of a better use for it, but as it is, it's a very secure and stable storage pocket, with a billowing inside backing to accommodate your packing needs, without giving away your secrets.


Here is that admin panel, showing off its five internal elastic webbing loops, for pistol magazines, flashlights, multi tools or a variety of other chunky items. On the outside, two more wide elastic loops run lengthways, each topped out with a second, narrower elastic bang, sectioned into two, ideal for pens, glow sticks and markers. Finishing it off is a zippered pocket, giving you a very versatile and being hook-backed, modular piece of accessory to suit your needs and loadout.



Lastly, here's a shot of me having slung the bag from back to front, showing off how level it rides. From here I could quickly access all three compartments with a yank of the cord-fobs, and get at my needfuls. Ideal in a travel situation, ideal in a hazardous situation. When I'm hauling a big load on my back, but still want access to my iPad, papers, food or EDC kit, this functionality, being able to have a comfortable, slung pack at my belly comes in very handy. Whilst a bit too small for my comfort as an everyday pack, (because I haul a lot of junk around) my partner Omega was quick to snaffle this one up as an out-and-about pack, that wouldn't weigh her down, be too "hooah" looking and tough.

This sling bag is all of that. And more.



Thursday, June 28, 2012

Review: Dead On - Annihilator superhammer


A very happy surprise was another birthday present I received from a good friend who knows my proclivities, something I in fact tried to find for myself but had alas been unable to find for myself. So, last week I was handed A Dead On - Annihilator Superhammer as fearsome a smasher as I could hope for in such a package.

This is a 35cm (14"), 800g (28oz) piece of forged steel. Tools adorn it top and bottom. The split head is made up of a solid and 1" square striking face, which features a Dead On® bottle opener at its chin. Good for those post-wrecking but pre-zombie smashing bottle of Nuka Cola (because you don't want to open bottles that are going to go in your mouth to have infected brain matter contaminated chunks stuck to the lip ...). The flip side of the striking face is Nail Puller/Tile Ripper which is a strong chisel edged tool-face, curved slightly to assist in slipping under and levering up what ever you are prying up.





Between the striking face and the "Nail Puller" the "Board Straightener" sits ready to grip and twist. The two sets of teeth are just over 4cm (1 5/8") and just under 3cm (1 1/8") in width, respectively, which is reported to fit standard board sizes (I don't actually know what this means). Below the chisel edged Nail Puller/Tile Ripper lies the frightfully formed Demolition Axe, which curves down almost to the edge of the rubberised grip. This is not a shaving-sharp axe, rather that the steel of the haft is formed to a triangular ridge to an angle of around 45 degrees to the full width of the haft. This leaves a very hardy working edge, and is intended for drywall, thin wooden structures, shingles and conduit. The middle of the curve is notched with what appears to be a wire-stripper, but could also be used as a nail-puller as well. Here you can see the Annihilator in it's current home, which is wedged in the middle of the Bullock Echo daypack and the Bravo hydration Pack combo which I reviewed recently. It fits in the mid-channel of double-wide PALS/MOLLE quite nicely, and nestles nicely behind the main drag-handle, without protruding out the bottom.At just over an inch in width, it is too wide to slot into PALS/MOLLE on it own.



The tail of the tool features several other interesting combination tools. The tip is a rugged ridged point, which could be used for penetration, or scoring as needed. Within the tip is the "Multi Purpose Wrench/Nail Puller", which as suggested includes a hex-bolt socket, and a wide feeding nail puller. The manufacturers suggest using the wrench for releasing concrete forms and other general uses and the tip for smashing, cracking and chipping away at tile, brick or other things deemed "to go away".

So, I felt it was a good idea to put the Annihilator up against the mighty Stanley Fatmax Fubar to give a good comparison. Let me first say I haven't yet done any real smashing with the Annihilator, just waved it around and banged a few posts and bricks. However, at 800g vs 1300g it already comes up significantly leaner. You can see in the side-by-side pictures that it is thinner and narrower. If a slighter tool is what you are after, this is it.


I noticed a slight bend to the left in my Annihilator, I cant tell if this is a design feature or a flaw, but it was certainly of little concern. The Annihilator lacks the curved pry-bar end of the Fubar, but it has the curved Nail Puller/Tile Ripper at the back of the head,  and has a number of other features built in that the Fubar lacks.

I plan to leave my Fubar in my in-car bug-out-bag, but will be sorely tempted to keep the Annihilator in my every-day bag. I am also strongly considering commissioning a kydex holster for it, so I can lash it to my other PALS/MOLLE kit. This is an awesome piece of kit. Who's up for a "lets smash things" video-blog?


Find one on Amazon here:

Tuesday, June 12, 2012

Review: Drop Leg Holster

A while back I attended a comic convention, Armageddon at which there were a number of stalls selling a variety of costume pieces, including a bunch of military looking kit. There was a considerable military cos-play contingent, so it was a good opportunity for me to see how other people wore their costume. Almost all of the costume pieces I saw were just that, poorly put-together costume pieces with bad stitching, un-taped seams, cheep light nylon and flimsy plastic hardware.  I did find one piece that I wanted to add to my collection: This no-name drop leg holster. The material is a stiff quilted nylon, in woodland, my most populous kind of cam. It is a highly adjustable "universal" holster, and to keep the "I don't own any firearms" tradition going, I have it holding one of my Nerf Scout pistols.

As far as a piece of rig goes, its a pretty standard setup as far as I can tell. It follows the same pattern as my 1/2 Leg rig in that it has a vertical belt strap and two thigh straps. A magazine pouch sits just at the forward facing edge of the holster, with a hook-and-loop closure flap.
In this rig, all the key components are adjustable. The top of the belt strap ends in a broad 50mm hook and loop belt-loop, with a hoop of  elastic webbing to give some shock absorption and give for the wearer. A wide Fastex type buckle about half way down gives a fast-on/fast-off option for those times where you need to shake a leg, so to speak, and a thigh-rig gets in the way. At the bottom of the belt-strap is another adjustable hook and loop closing webbing section, which is fixed to the main body of the holster by a plastic hardware loop, again adjustable by hook-and-loop.

Two thigh straps are sewn-in to the back of the holster directly, and following the same pattern as the belt-strap, and features an elastic webbing section, at the body of the holster, with a Fastex style clip. The webbing strap is adjustable with a plastic slide. I found, even with my fairly slim thighs, this was a tight fit. Someone with larger thighs would have considerable trouble wearing this particular model.




The holster section itself is also highly adjustable: Internally there are two strips of hook-and loop, one of which makes up one half of the closure system, the other is positioned such that the loose webbing strip (somewhat obscured by my fingers here) can be affixed to it to cradle the barrel of the holstered pistol. At the top of the holster you can see the webbing tabs with a press stud, for securing the carried pistol. Mine is faulty, and will not "snap" closed. Sign of the low-quality knock-off that this piece is. It also seemed a little "small" and may not accommodate a real pistol, or at least not one with a lighting system.

The holster closes with a three-piece hook-and-loop seam, in which a middle layer (the left side) loops around to the right, and is covered by the long strip of hook-and-loop held out in this picture. This gives a very secure and form-fitting carriage, and the holster is complete.

From this position you can also see that the security-snaps are also adjustable.

All in all, I was happy with this addition to my collection, for what it cost me and what I will be using it for, I will get my money's worth. I would not recommend it however for someone who was going to stake their life on their equipment however. It may well have been made off a good pattern and I like the functionality, the ability to widely adjust its layout and "fit", but this is a theatrical quality piece at best. 
Related Posts Plugin for WordPress, Blogger...